84
7
Setup Menu
Keyboard
1
Enter a password of up to 16
characters.
• Highlight characters using !, ", #,
or $ and press MENU/OK to enter the
highlighted character at the current
cursor position (to delete the character
at the current cursor position, select
[Delete]). Press ADJ./MEMO when
entry is complete (to exit without
changing the password, press DISP.).
2
Re-enter the password.
• A confirmation dialog will be displayed; re-enter the password as
described above to save the password and return to the setup menu.
If the passwords do not match, a message will be displayed and the
camera will return to the password entry dialog.
Caution ---------------------------------------------------------------------------------
You will be prompted to enter a password
whenever you attempt to access functions
protected using [Password Protection]. Enter
the password as described in Step 1, above. If
the password is incorrect, a message will be
displayed; select [Yes] to return to the password
entry dialog.
Keyboard area
Password area
Keyboard area
Password area
To Next Page
Loading...
