Ricoh G700SE - Memo Increment; Using Memo Increment

32
Memo Increment
If a memo description ends in a number,
you can increase or decrease the number by
pressing ! or ".
Memo increment is available only when [Mode1]
is selected for [Camera Memo Mode] in the
camera memo menu.
Using Memo Increment
Transfer to the camera a memo list file
containing descriptions that end in numbers
and follow the steps below.
1.
Select [On] for [Memo Increment].
Select [On] for [Memo Increment] in the
camera memo menu.
2.
Select an item.
Press ! or " to highlight an item in the
camera memo dialog and press $ to view
descriptions for the highlighted item.
3.
Select a description that ends in a
number.
Press ! or " to highlight a description
that ends in a number and press $ to
display the memo increment dialog.
No.102
Camera Memo
Cancel Ok
Change Number
A warning will sound if you select a
description that does not end in a number.
4.
Edit the number.
Press ! or " to choose a new number and
press MENU/OK twice to return to shooting
mode. The new number will be recorded
with the next photograph taken.
The new number is stored as a temporary memo.
The original description is not affected.