Ricoh G700SE - Connecting to a Wireless Network

112
Wireless Networks
12
12 Wireless Networks
Pictures can be uploaded from the camera over a wireless Local Area
Network (LAN). Before accessing a wireless network, select [W-LAN]
for [Communication Mode] (GP.102) in the expanded settings menu
(GP.98).
Connecting to a Wireless Network
1
Configure the host device (GP.113).
• Use the supplied ST-10 software to configure the host ftp server.
If desired, the supplied SR-10 software can be used to create an
SR-10 ftp server on your computer exclusively for use by the G700SE
(GP.120).
2
Create a host list (GP.123).
• Use ST-10 to create a host list containing connection information for
the hosts you configured in Step 1.
3
Copy the host list to the camera (GP.123).
• Connect the camera to the computer using the supplied USB cable
and transfer the host list to internal memory, or use a memory card
to copy the host list to the camera (GP.125). Host lists can be
edited on the camera after transfer (GP.127).
4
Select [W-LAN] for [Communication Mode].
• Select [W-LAN] for [Communication Mode] (GP.102) in the
expanded settings menu (GP.98).
5
Transfer images.
• Use quick send (GP.104) or the [File Send] option (GP.74) in
the playback menu (GP.72) to transfer images to a host selected
from a list displayed when transfer begins. If desired, the host can
be selected in advance using the [Send To] option (GP.102) in the
expanded settings menu (GP.98).