118
Wireless Networks
12
Item Name Description
Network Key Enter the security key. Select a key type from [String]
and [Hex] and enter an encryption key in the box.
[String]
If [WEP] is selected for [Cryptography], enter
an encryption key of 5 or 13 characters. Entering a 5-
character string uses 40-bit encryption, and entering
a 13-character string uses 128-bit encryption.
If [AES] or [TKIP] is selected, enter an
encryption key from 8 to 63 characters.
[Hex]
If [WEP] is selected for [Cryptography], enter
a ten-character (40 bit) or 26-character (128 bit) key.
If [AES] or [TKIP] is selected, enter a 64-
character key.
Authentication [Open System]
This can be selected only when [Cryptography] is
set to [None] or [WEP]. This authentication does not
use WEP keys.
[Shared Key]
This can be selected only when [Cryptography] is set
to [None] or [WEP]. This authentication compares
the WEP keys of different devices.
[WPA-PSK]
This can be selected only when [Cryptography] is set
to [AES] or [TKIP].
[WPA2-PSK]
This can be selected only when [Cryptography] is set
to [AES] or [TKIP].
[FTP Send] tab
Item Name Description
Server Name Enter the name or IP address of the ftp server to which
images will be uploaded. If you are using the SR-10
server (GP.120), enter the IP address.
User Name and Password Enter a user name and password for the ftp server to
which images will be uploaded. Not required if you
are using the SR-10 server (GP.120).
Specify Folder Choose the destination folder for images uploaded to
the ftp server.
To Next Page
Loading...
