Ricoh G800 - The Network Menu (G800 SE Only)

126
Expanded Settings Menu (G800SE Only)
11
BR-1 Format
Choose the type of barcode read with the BR-1 barcode reader unit. Highlight a
barcode and press $ to view the options below. Selecting [Auto] or [Number of
Digits] allows bar codes of the selected format to be read using the BR-1.
Option Description
Off The BR-1 will not read bar codes in the selected format.
Auto The BR-1 chooses the number of digits automatically.
Number of Digits
Press $ to choose the number of digits read.
Caution ------------------------------------------------------------------------------
Only one of [Code39], [Code39FullAscii], and [Code32] can be active at a time.
Enabling any one of these options disables the other two.