Ricoh G800 - Configuring the Host

138
Wireless Networks (G800SE Only)
14
Caution ---------------------------------------------------------------------------------
• The camera’s wireless transmitter has a maximum range of about 30 m (100 ft.);
ensure that there are no obstacles between the two devices.
• The supplied ST-10 software (available for Windows only) is required for
connection to a wireless LAN.
Configuring the Host
Before images can be transferred to a host computer or other
device over a wireless network, a communication list containing the
necessary connection information must be copied to the camera. The
supplied ST-10 software is used to configure the host computer for
transfer.
Note -------------------------------------------------------------------------------------
See P.177 for information on installing ST-10.
1
Launch ST-10.
2
Click [All Detailed Setups].
• Click [All Detailed Setups] in the
[ST-10] window.