EasyManua.ls Logo

Ricoh G800 - 15 GPS (G800 SE Only); Connecting to a GPS Unit; The GP-1 GPS Unit (Available Separately)

Ricoh G800
222 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
162
GPS (G800SE Only)
15
15 GPS (G800SE Only)
When an optional GP-1 GPS unit or Bluetooth®-equipped GPS unit is
connected, the camera can record the GPS data (including latitude,
longitude, and compass heading) supplied by the device.
Caution ---------------------------------------------------------------------------------
GPS data are not recorded with photos taken in text mode.
Local geographic conditions may prevent or delay the acquisition of GPS data.
When both a GP-1 and a Bluetooth®-equipped GPS unit are connected, the
preferred source can be selected using the [GPS Data Select] option (GP.120) in
the expanded settings menu (GP.118).
Connecting to a GPS Unit
The GP-1 GPS Unit (Available Separately)
There is no need for complicated
adjustments to camera settings when
using the GP-1. To connect the GP-1, turn
the camera off and use the supplied Allen
key to remove the side cover from the
camera. Connect the GP-1 with the status
indicator at the rear of the camera and
tighten the locking nut.
Note -------------------------------------------------------------------------------------
The GP-1 is not equipped with a battery or on/off switch. It turns on to supply
GPS data when the camera is turned on and turns off when the camera is
turned off.
Turn the camera off before connecting or disconnecting the GP-1.

Table of Contents

Other manuals for Ricoh G800

Related product manuals