31 October 2001 TIMING CHART
6-43
Detailed
Descriptions
(1) Press the print key.
(2) The drum rotates at 30 rpm, then the speed goes to 60 rpm.
(3) When the drum is at the master eject position sensor, the paper delivery motor’ vacuum fan motor, and air knife fan
motor all turn on.
(4) When the drum is at the feed start timing sensor plus a feed delay time (X), the paper feed motor and the pressure
release solenoid turn on. X depends on the selected printing speed.
(5) After a certain time (Y), the registration motor turns on.
(6) When the drum is at the paper exit timing sensor, the solenoid turns off.
To Next Page
Loading...
