COVERS / BOARDS 31 October 2001
3-2
3.2.2 REAR COVERS
[A]: Rear left cover (! x 5)
[B]: Rear right cover (! x 3)
[C]: Upper left cover (! x 2)
[D]: Rear upper cover
3.2.3 MPU
• Rear left cover, Rear right cover (☛ 3.2.2)
[A]: MPU (" x 17, ! x 6, 9 clamps)
CAUTION: Move the RAM [B] from the old board to the new one, so that the SP
mode settings will be transferred to the new board. Adjust the master
end sensor (☛ 3.5.4) after installing the new MPU.
C238R007.WMF
C238R008.WMF
[A]
[B]
[C]
[D]
[A]
[B]
To Next Page
Loading...
