Ricoh Gestetner 5430 - Psu

31 October 2001 COVERS / BOARDS
3-3
Replacement
Adjustment
3.2.4 PSU
• Upper left cover (☛ 3.2.2)
• Master eject unit (☛ 3.4.1)
[A]: PSU (" x 5, ! x 2, 2 clamps)
CAUTION: When the PSU is replaced, the thermal head voltage returns to the
default. Adjust the thermal head voltage (☛ 3.5.3) after installing the
new board.
C238R009.WMF
[A]