Ricoh Gestetner 5430 - Adjusting the Print Image Density

Operation
20
1
Adjusting the Print Image Density
You can adjust the print image densi-
ty to suit your needs. There are two
ways:
❖
❖❖
❖ Before Making a Master
Use the {
{{
{Image Density}
}}
} key.
❖
❖❖
❖ After Making a Master
Use the {
{{
{W
WW
W}
}}
} or {
{{
{V
VV
V}
}}
} key.
Before Making a Master
A
AA
A
Use the {
{{
{Image Density}
}}
} key before
pressing the {
{{
{Start}
}}
} key.
Note
❒ When you use originals with
colored background such as
blue or red, adjust the image
density to lighter to prevent
printing with dirty background.
After Making a Master
A
AA
A
Press the {
{{
{V
VV
V}
}}
} key to increase the
speed and press the {
{{
{W
WW
W}
}}
} key to re-
duce the speed.
Note
❒ The faster the printing speed be-
comes, the lighter the printing
density is. If you want darker
prints, decrease the printing
speed.
Reference
For details about printing
speed, see p.23 “Changing the
Printing Speed”.
PinkGold-F_V4_FM.book Page 20 Tuesday, May 27, 2003 3:33 PM