Ricoh Gestetner 5430 - Program; Storing Your Settings; Recalling a Program

Operation
42
1
Program
You can store up to 9 frequently used
print job settings in machine memory,
and recall them for future use.
Note
❒ The stored programs are not
cleared when you turn off the main
switch.
❒ The stored programs cannot be de-
leted. If you want to change a
stored program, overwrite it.
Storing Your Settings
A
AA
A
Make the necessary print settings
you want to put into memory.
B
BB
B
Press the {
{{
{Program}
}}
} key.
“Pro0”is displayed on the counter.
C
CC
C
Hold down the program number
you want to store the settings in
for at least 3 seconds.
Note
❒ Make sure that the previous job
settings stored under the select-
ed program number are over-
written.
Recalling a Program
A
AA
A
Press the {
{{
{Program}
}}
} key.
“Pro0”is displayed on the counter.
B
BB
B
Select the program number you
want to recall with the number
keys.
C
CC
C
Press the {
{{
{q
qq
q}
}}
} key.
The stored settings are recalled.
PinkGold-F_V4_FM.book Page 42 Tuesday, May 27, 2003 3:33 PM