2
Playback Functions
111
Note -----------------------------------------------------------------------------------------------------------
• When connecting with an AV cable, confirm the video format of the AV device. The default video
format setting of the camera varies depending on the country or region where you purchased it. To
change the video format setting, set in [Video Out Mode] of the [Setup] menu.
• The view switches to single image view when an HDMI cable is connected or disconnected.
• The resolution is set to [AUTO] during HDMI output. If the resolution of the images displayed on the AV
device is low, change the setting in [HDMI Output] of the [Setup] menu.
To Next Page
Loading...
