3
Changing Camera Settings
123
1 Select [Set Fn1 Button], [Set Fn2 Button], or [Effect Button
Setting] in the [Key Custom Options] menu, and then press the
$ button.
2 Press the !" buttons to select the
function to register, and then press
the # button.
The function is registered, and then the [Key
Custom Options] menu reappears.
Note -----------------------------------------------------------------------------------------------------------
• When the power is turned on or the mode dial is turned,
the current functions for the Fn1, Fn2, and Effect buttons
are displayed. If [Fn Button Settings] of the [Setup] menu
is set to [Off], the functions are not displayed.
To Next Page
Loading...
