Ricoh GR II - Page 31

29
Before You Begin
Setting the Date and Time
When the power is turned on for the first time, the [Date Settings] screen
appears.
1 Set the year, month, day, hour,
minute, and date format.
Press #$ to select an item, and press !" to
change the value.
To cancel the setting, press the r button.
2 Press the MENU/OK button.
A confirmation screen appears.
3 Press the MENU/OK button.
The date is set.
Note -----------------------------------------------------------------------------------------------------------
• If the battery is removed for about five days, the date and time settings will be lost. To retain the date
and time settings, insert a battery with sufficient power for at least two hours, and then remove the
battery.
• The set date and time can be changed in [Date Settings] of the [Setup] menu.
• The language displayed for the menus and messages can be changed in [Language/N] of the
[Setup] menu.