Ricoh GR III - Page 21

21
Focus Settings:
Focus
AF, MF, Snap and infinity
Snap Focus Distance
1m, 1.5m, 2m, 2.5m, 5m and infinity
Focus Peaking
Highlight Edge, Extract Edge and Off
MF Auto Magnification
On and Off
Exposure Setting
AE Metering
Multi-segment, Center-weighted, Spot and Highlight-weighted
ND Filter
On and Off
・It will be captured by P-mode regardless of the position of the Mode Dial. The exposure compensation is
available
White Balance Settings:
White Balance
Auto WB, Daylight, Shade, Cloudy, FI.-Daylight Color, FI.-Daylight White,
FI.-Cool White, FI.-Warm White, Tungsten, CTE, Manual WB and Color
Temperature
WB Fine-tuning
On or Off
AWB in Tungsten Light
High or Low
Shooting Settings:
Still / Movie
Still or Movie
Macro Mode
On or Off
Movie Capture Settings.
Framerate
60p, 30p or 24p
Sound Record
On or Off
Image Process Settings:
For GR III (firmware version 1.20 or earlier)
Image Control
Standard, Vivid, Monotone, Hard Monotone, High-Contrast B&W, Positive
Film, Bleach Bypass, Retro, Custom 1 and Custom 2
Peripheral Illumination.
Correction
On or Off
Dynamic Range
Correction
Highlight Correction: Auto or Off
Shadow Correction: Auto, Low, Medium, High or Off
To update to the latest GR III firmware version, click here.
For GR IIIx and GR III firmware version 1.30 or later.
Image Control
Standard, Vivid, Monotone, Hard Monotone, High-Contrast B&W, Positive
Film, Bleach Bypass, Retro, Cross process (#1), Custom 1 and Custom 2
Peripheral Illumination.
Correction
On or Off
Dynamic Range
Correction
Highlight Correction: Auto or Off
Shadow Correction: Auto, Low, Medium, High or Off
(#1) Please use the GR III with the latest firmware.
To update to the latest GR III firmware version, click here.