Ricoh IM C2000 Series User Manual

Printing on Envelopes
Load envelopes in the bypass tray or paper tray.
Load envelopes in the machine and change the Tray Paper Settings in the Control Panel.
The procedure is described using the [Classic] screen type of [Settings] as an example. When you are
using the [Standard] screen type, specify the settings in the screen below.
• [Tray/Paper Settings]
The names of the setting items may differ on the setting screen for [Classic] and [Standard] screen types.
For details, see "Settings Menu Compatibility List (Classic to Standard Settings)", User Guide (Full
Version).
1. Load an envelope in the Bypass Tray or the Paper Tray.
Types and orientations of
envelopes
Tray 2 to 4 Bypass Tray
Side-opening envelopes
DZW708
Flap: open
Bottom side of the envelope:
right
Printing surface: upper side
DZW709
Flap: open
Bottom side of the envelope:
left
Printing surface: lower side
4. Print
134

Ricoh IM C2000 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	2, 300 sheets
Duplex Printing	Yes
Standard Memory	2 GB
Power Consumption (Maximum)	1.3 kW
Copy Speed (Color)	20 cpm
Copy Speed (Mono)	20 cpm
Copy Resolution	600 x 600 dpi
Print Speed	20 ppm
Scan Resolution	600 dpi
Connectivity	USB, Ethernet, Wi-Fi
First Print Time (Color)	7.5 seconds or less
Supported Paper Sizes	A3, A4, A5, B4, B5
Paper Weight	52 - 300 gsm
Hard Disk Drive	320 GB
Power Source	50/60Hz
Fax Resolution	200 x 200 dpi