Ricoh IM C2510 - Page 247

When Messages Appear
245
8
Message
Cause
Solution and reference
"Information for
user authentication
is already
registered for
another user."
In LDAP
authentication, the
same name is
registered under
different IDs on
different servers,
and duplicate
names (account
names) occurred
such as when
switching the
domain (server).
Consult the user administrator (or
custom-privileges administrator who has
equivalent privilege). User administrator:
Delete the corresponding user from the
address book, and register the user again
after resolving the duplicate names on
different servers.
"Insufficient
Memory"
The amount of
available memory is
insufficient.
Decrease [Resolution] in the printer driver.
See "Applying Different Print Settings
Depending on the Document Type", User
Guide (HTML).
"Out of paper in the
following paper
tray. Load paper."
"To force print,
select another tray
and press [Print]
key."
The paper tray
specified in the
printer driver has
no paper loaded.
• To proceed with printing after
changing the paper setting, select a
tray and press [Print]. However, when
Staple, Punch, Fold, Cover Sheet, Slip
Sheet, Chaptering, or Designate is
specified, or when Duplex printing is
specified on a paper tray that does
not support the function, printing
cannot be performed. When Sort is
specified, only one copy of the
document is printed.
• To proceed with printing on the
specified paper, load the paper in the
tray.
page76”Loading Paper into the Paper
Tray”
"Memory Overflow"
The insufficient
memory error has
occurred while
printing from the
printer driver (PCL
6).
In the printer driver, go to the [Others] tab
[Special Settings] [Image Quality]
and then change [Vector/Raster:] to
[Raster].