The user name
and/or password
registered in the
address book are
invalid when
performing Folder
Transfer.
Select the forwarding destination in the
address book, press [Edit], and specify
[Destinations] tab [Folder] [Folder
Authentication Info] again.
See "Registering the Destination Folder to
Use for Send to Folder", User Guide
(HTML).
"Network
communication has
failed. Failed to
send. Please check
the administrator
email address
setting."
[14-00]
The administrator
e-mail address is
not registered when
the machine is
configured to send
Records by e-mail.
• Specify [Settings] [System
Settings] [Send (Email/Folder)]
[Email] [Administrator's Email
Address].
• When configuring the machine to not
send Records by e-mail, change the
current value of bit number [4] under
switch number [21] in [Settings]
[Fax Settings] [Detailed Initial
Settings] [Parameter Setting]
[Parameter Setting].
See "Changing the Parameter
Settings", User Guide (HTML).
"Network
communication has
failed. Failed to
send. Please check
user name and
password."
[14-09]
The user name
and/or password
registered in the
address book are
invalid when
performing Folder
Transfer.
Select the forwarding destination in the
address book, press [Edit], and specify
[Destinations] tab [Folder] [Folder
Authentication Info] again.
See "Registering the Destination Folder to
Use for Send to Folder", User Guide
(HTML).
"Network
communication has
failed. Failed to
send. The
registration of fax
email address or
administrator email
address is
required."
[14-33]
Both the e-mail
address to use for
sending and
receiving e-mails
and the
administrator e-
mail address are
not registered when
sending an e-mail.
Specify [Fax Email Account] on [Settings]
[Fax Settings] [Detailed Initial
Settings] or [Administrator's Email
Address] on [Settings] [System
Settings] [Send (Email/Folder)]
[Email].
See "Preparing the Machine for Sending
and Receiving Documents by Internet
Fax", User Guide (HTML).
To Next Page
Loading...
