Ricoh IM C4510 - Page 246

8. Troubleshooting
244
8
Message
Cause
Solution and reference
See "System", User Guide (HTML).
"Exceeded the
maximum unit
count for Print
Volume Use. The
job has been
cancelled."
When the print
volume is limited,
printing was
canceled because
the print volume of
a user exceeded
the upper limit
allotted for the
user.
For details about the print volume use
limitation, consult the user administrator
(or custom-privileges administrator who
has equivalent privilege). The user
administrator can clear the counter or
change the limit on the print volume.
See "Confirming the Counter for Each
User", User Guide (HTML).
See "Specifying Maximum Print Volume
Use of Each User", User Guide (HTML).
"File system is full."
The file system is
full, and the PDF file
cannot be printed.
Erase documents that are no longer
needed.
See "Deleting Documents Stored in the
Machine", User Guide (HTML).
See "Deleting Documents from Document
Server", User Guide (HTML).
"Hardware
Problem: Internal
storage"
An error is
occurring on the
internal storage of
the machine.
Turn off the power of the machine, wait
for 10 seconds or more after confirming
that the main power indicator is turned
off, and then turn on the power.
page19”Turning On and Off the Power”
If the message persists even after you
have turned the power off and then on,
consider repairing the machine.
"Hardware
Problem: USB"
An error has
occurred on the
USB interface.
"Hardware
Problem: Ethernet"
An error has
occurred in the
Ethernet interface.
"Hardware
Problem: Wireless
Card"
An error has
occurred in the
wireless LAN board.
Turn off the power of the machine, check
that the Wireless LAN board is correctly
installed in the machine, and then turn on
the power.
page19”Turning On and Off the Power”
If the message persists even after you
have turned the power off and then on,
consider repairing the machine.