The data in the
memory could not
be retrieved.
Turn off the power of the machine, wait
for 10 seconds or more after confirming
that the main power indicator is turned
off, and then turn on the power.
page19”Turning On and Off the Power”
"No response from
the server.
Authentication has
failed."
In LDAP or
Windows
authentication, a
timeout error
occurred while
submitting an
authentication
query to the server.
• Consult the administrator of the
authentication server.
• When using the Active Directory of
the Windows server for LDAP
Authentication, change [Settings]
[System Settings] [Settings for
Administrator]
[Authentication/Charge]
[Administrator Authentication/User
Authentication/App Auth.] [LDAP
Search] "Follow Referrals on
LDAP Server" to [Inactive].
"Output tray has
been changed."
The destination to
deliver the output
paper was changed
because of the
paper size
limitation of the
output destination.
Specify the correct destination to deliver
the output paper.
"Out of paper in the
following paper
tray. Load paper."
The paper size or
paper type
specified in the
printer driver does
not match the
paper settings, in
the machine, for the
bypass tray.
Specify [Driver/Command] in [Settings]
[Tray/Paper Settings] [Printer]
[Tray Setting Priority] [Bypass Tray].
To Next Page
Loading...
