2. Select [Scan to Email] on the scanner screen.
3. Place the original on the scanner.
See "Placing an Original to Scan", User Guide (Full Version).
4. Press [Send Settings] on the scanner screen and configure the scan settings according to
the purpose of the scanned data.
page 138 "Scanning an Original with Suitable Quality and Density"
page 140 "Specifying the File Type When Scanning a Document"
5. Specify the destination.
1. Press and then select [Enter Using Keyboard].
2. Enter the e-mail address, and press .
3. Specify the e-mail address that was entered manually and press [Reg. to Add. Book].
5. Scan
124
To Next Page
Loading...
