1. Vents
Prevent overheating.
2. Main power switch
To operate the machine, the main power switch must be on. If it is off, turn the switch on.
3. Auto Document Feeder (ADF)
Lower the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
4. Exposure glass
Place originals face down here.
5. Control panel
See page 22 "Names and Functions of the Control Panel".
6. Paper guides
When loading paper in the bypass tray, align the paper guides flush against the paper.
7. Bypass tray
Use to copy or print on label paper (adhesive labels).
8. Extender
Pull this extender out when loading A4 , 8
1
/
2
× 11 or larger size paper in the bypass tray.
9. Paper tray
Load paper here.
10. Paper feed unit
Load paper here.
1. Getting Started
14
To Next Page
Loading...
