2. Press [2 Sided/Combine].
3. Specify about the original, print side, and combining.
• Original Direction: Specify the orientation to place the originals.
• Original Setting: Specify the condition of the originals to copy (1 sided/2 sided
(page opening direction)).
• Print Side Setting: Specify the condition of the copied sheet (1 sided/2 sided (page
opening direction)).
• Combine Settings: Specify the number of pages to combine on one side of a sheet.
3. Press the paper tray select key and select the paper to use.
4. Place an original.
See "Setting an Original on the Scanner", User Guide (Full Version).
To position the right-page first and then the left page when copying an original written
longitudinally, place the original upside down in the ADF.
Example: Combining 2 Pages
Orientation Results
5. Press [Start].
When placing the originals on the exposure glass, press [Finish Scn] after scanning all of the
originals if necessary according to the number of originals.
Combining and Copying a Multi-page Original onto a Single Sheet of Paper
63
To Next Page
Loading...
