4. Click [IP], and configure the information of the machine.
• Address: Enter the IP address of the machine.
• Protocol: Select [Line Printer Daemon - LPD]. If the printer takes time to perform operations
when using the [Line Printer Daemon - LPD] protocol, change the protocol to [HP Jetdirect -
Socket].
• Use: Check that the machine name is displayed. If "Generic PostScript Printer" is displayed,
the entered IP address may not be correct.
When "Generic PostScript Printer" is displayed even though the IP address is correct
Perform the following procedure to select the PPD file of the machine:
1. Select [Select Software...] on "Use".
5. Print
118
To Next Page
Loading...
