PAPER EXIT 17 January, 2003
6-76
6.9 PAPER EXIT
6.9.1 OVERVIEW
[A]: To standard paper tray
[B]: To external paper tray
[C]: Junction gate
[D]: Junction gate solenoid
• After fusing, the junction gate feeds paper to the standard paper tray or the
external paper tray. The junction gate solenoid [D] controls the junction gate as
follows:
– To feed paper to the standard paper tray: The junction gate solenoid is off
(default).
– To feed paper to the external paper tray: The junction gate solenoid is on.
• Development drive motor-K drives the exit rollers.
G080D924.WMF
G080D708.WMF
[D]
[A]
[B]
[C]
To Next Page
Loading...
