Quick Reference
J012/J013/J014 4-66 SM
Service Data List
(Controller or
Fax/Scanner/ARDF)
1. [Menu]> [#]> [*]> [Yes]> "1. SERVICE'S CHOICE"
2. [#] or [%] > "4. REPORT"> [Yes]> "SERVICE DATA
LIST"> [Yes]
Service Mode [Menu]> [#]> [*]> [Yes]> "1. SERVICE'S CHOICE"
Service Summary 1. Confirm that paper is loaded in the paper tray.
2. [Clear Modes]> [107]> [Clear/Stop] for 3 sec. and
release> "Service Menu"> [Yes]> "Bit Switch"
3. [#] or [%] > "Service Summary"> [Yes]> "Press Yes
Key"> [Yes] to print the report
System Summary See "Configuration Page" above
T.30 Protocol List 1. [Menu]> [#]> [*]> [Yes]> "1. SERVICE'S CHOICE"
2. [#] or [%] > "4. REPORT"> [Yes]> "SERVICE DATA
LIST"
3. [#] or [%] > "T.30 PROTOCOL LIST"> [Yes]
Version Display (All)
MAIN F/W VER.
ENGINE F/W VER.
NIC F/W VER.
1. [Menu]> [#]> [*]> [Yes]> "1. SERVICE'S CHOICE"
2. [#] or [%] > "2. ADJUST">"3. VERSION
DISPLAY">[Yes] "MAIN F/W VERSION.”
3. [#] or [%] > "MAIN F/W VERSION", "ENGINE F/W
VERSION", "NIC F/W VERSION.”
4. For more see "Service Mode" in "5. Service Tables"
Version Display (Printer
Engine Only)
1. [Clear Modes]> [107]> [Clear/Stop]> "Service Menu">
[Yes]> "Bit Switch"
2. [#] or [%] > "Version Display"> [Yes]
To Next Page
Loading...
