The settings available are:
Description Value Direction of change
Top Margin
-25 to +25
Each increment causes
approximately 4 pels shift (at
600dpi).
A positive change moves the
image down the page and
increases the top margin. A
negative change moves the
image up and decreases the
top margin.
Bottom Margin
-20 to +20
Each increment causes
approximately0.55 mm shift in
the bottom margin.
A positive change compresses
the image so it appears to
move down the page, and a
negative change moves the
image up.
Left Margin -25 to +25
A positive change moves the
image right, and a negative
change moves the image left.
No compression occurs.
Right Margin -10 to +10
A positive change moves the
image right, and a negative
change moves the image left.
To set print registration:
1. Print the Quick Test page.
a.Touch "REGISTRATION" from the Diagnostics Menu.
5. System Maintenance
162
To Next Page
Loading...
