2. When the motor stops, the results are displayed. Listed below is an example of such results:
Duplex Motor Test Test Passed
Avg. PWM of High-Speed Test: 1d
Avg. PWM of Low-Speed Test: Oe
Max. PWM of Low-Speed Test: 00
Min. PWM of Low-Speed Test: 0b
Motor KE Value: 2d
Motor Test Results: 00
3. Touch "Back" or press "Stop" to exit the test.
Duplex feed 1
This test feeds a blank sheet of paper to the duplex paper stop position 1. This test can be run using any
of the supported paper sizes.
To run the Duplex Feed 1 Test:
1. Touch to select "Duplex Feed 1" from DUPLEX TESTS. The power indicator blinks while the
paper is feeding, and the message "Duplex Feed 1 Feeding…" displays. The message "Duplex
Feed 1 Clear Paper" displays when the paper reaches paper stop position 1, and the power
indicator turns on solid.
2. Remove the media from the duplex unit, and clear the message on the operator panel by pressing
"Stop" .
Duplex feed 2
This test feeds a blank sheet of paper to the duplex paper stop position 2. This test can be run using any
of the supported paper sizes.
To run the Duplex Feed 2 Test:
1. Touch to select "Duplex Feed 2" from DUPLEX TESTS. The power indicator blinks while the
paper is feeding, and the message "Duplex Feed 2 Feeding…" displays. The message "Duplex
Feed 2 Clear Paper" displays when the paper reaches the duplex paper stop position 2, and the
power indicator turns on solid.
2. Remove the media from the duplex unit, and clear the message on the operator panel by touching
"Back" or pressing "Stop" .
5. System Maintenance
170
To Next Page
Loading...
