example, if the right margin setting on the page is -2, and the number that is closest to the darkest
line on the graph is 3 (-2+3), then the right margin setting will be equal to +1.
6. Press or to the desired setting, and press.
7. Print the Quick Test page again and check that the darkest line in the center graph is equal to zero.
If it is equal to zero, then check to see if the left, top, and bottom margins are visible. If it is not
equal to zero, then repeat step 5.
• The alignment of the left margin positions the black plane to the right or left. The alignment of
the right margin does not alter the margins and should only be used to adjust the printhead.
Printhead Assembly Electronic Adjustment
185
To Next Page
Loading...
