User primary message Explanation
37 Insufficient memory for
flash defragment operation
This message is displayed when insufficient printer memory is
available to perform Flash Memory Defragment operation.
This message appears prior to the actual start of the defragment
operation.
Press "Select" (
) to stop the defragment operation.
To perform the defragment operation, you can:
• Delete fonts, macros, and other data in RAM.
• Install additional printer memory.
•
Press "Menus" (
) to access the Busy/Waiting Menu.
The following functions are available using the Busy/Waiting
Menu:
-Cancel Job
-Reset Printer
• Menu Lockout does NOT prevent access to the Busy/Waiting
Menu.
38 Memory Full
This message is displayed when the machine is processing an
incoming job and there is not enough memory available to continue
processing the job.
The following actions can be taken:
• Determine how to make more memory available to your print
job by:
-Deleting fonts, macros and other data in RAM.
-Simplify your print job.
-Install additional memory
• Press "Select" ( ) to clear the message and continue printing.
The job may not print correctly.
• Press "Menus" ( ) to access the Busy/Waiting Menu.
The following functions may be available:
-Cancel Job
Messages and Error Codes
203
To Next Page
Loading...
