User primary message Explanation
59 Incompatible Tray <x>
An incompatible tray is installed. For Tray x, x= 2, 3, 4, or 5.
Remove the incompatible tray and press to clear the message.
If the user installed the incompatible device to satisfy a Check Device
Connections/reattach message, the user should reinstall an
associated compatible option or hot unplug the option.
1. Turn off and unplug the machine.
2. Remove the incompatible trays.
3.
Plug in the machine, and turn it on.
61 Defective Disk
This error code displays when the machine detects a defective disk.
This error may occur at power on or during disk format and write
operations. While this message displays.
Press
to clear the message. The disk is marked defective and
normal machine operations continue. Disk operations are not
allowed with a defective disk. The Format Disk menu is not shown.
62 Disk Full
This error code displays when there is not enough free space on the
disk to hold the resources that have been requested to be written to
the disk. This message displays for both resource and PostScript Disk
operators when the disk is full.
63 Unformatted Disk
The optional disk is not formatted.
Format the disk. If the error remains after formatting, the disk may be
defective.
80 Routine Maintenance
The operator panel displays this message at each 300K page count
interval. It is necessary to replace the fuser assembly, transfer roller,
charge roll, and pick rolls at this interval to maintain the print quality
and reliability of the machine. The parts are available as a
maintenance kit.
84 PC Kit Life Warning
Replace the PC kit to ensure print quality.
84 Replace PC Kit
88 Cartridge Low
This warning is displayed when the cartridge is low. Press "Check" to
continue.
88 Cartridge Early Life
Warning
Messages and Error Codes
207
To Next Page
Loading...
