Error Description Action
845.yy Scanner Failure
CCD failure ( p.267 "CCD Service
Check").
845
Front scan module cable failure or SCC
card failure
CCD channel failure. Check each channel
(mono, R, G, B) for identical values
indicating bad cable and/or SCC card.
Excessive noise test for the dark data
indicating some sort of CCD or analog
electronics issue on that channel or channels
( p.267 "CCD Service Check").
845.01
Rear scan module cable failure or SCC
card failure
CCD channel failure. Check each channel
(mono, R, G, B) for identical values
indicating bad cable and/or SCC card.
Excessive noise test for the dark data
indicating some sort of CCD or analog
electronics issue on that channel or channels
(
p.267 "CCD Service Check").
845.02 Cable / SCC Failure
Front scan module connector or cable
failure ( p.267 "CCD Service Check").
845.03 Cable / SCC Failure
Rear scan module connector or cable
failure ( p.267 "CCD Service Check").
845.yy CCD Failure
The CCD is defective ( p.267 "CCD
Service Check").
846 Front calibration strip unusable
p.267 "CCD Service Check"
846.01 Rear calibration strip unusable
846.02 Front calibration strip too far left
The font calibration strip is placed to high or
too low ( p.267 "CCD Service Check").
846.03 Front calibration strip too far right
p.267 "CCD Service Check"846.04 Front calibration strip has excessive skew
846.05 Front calibration strip has excessive bow
846.06
Front calibration strip has excessive dark
area
Front excessive variability for Mono, Red,
Green, or Blue ( p.267 "CCD Service
Check").
Messages and Error Codes
221
To Next Page
Loading...
