Message Problem and solutions
SMTPC: failed to connect smtp server. Connection to the SMTP server failed. This could be
because no connection to the network has been
established, or the network configuration is
incorrect, so there is no response from the SMTP
server, or the specified SMTP server name is
incorrect, or the specified SMTP server IP address
could not be found in the DNS server, or a server
other than the SMTP server has been specified, or
the specified SMTP server port number is incorrect.
Check the DNS Server's IP address and SMTP
server's IP address, or the SMTP server name and
SMTP port number, or the SMTP server's SMTP port
number, or the network connection and
configuration.
SMTPC: username or password wasn't correct.
[response code] (information)
Connection to the SMTP server failed, because the
specified SMTP user name is incorrect, or the
specified SMTP password is incorrect. Check the
SMTP user name and password.
Snmp over IPv4 is ready. Communication over IPv4 with snmp is available.
Snmp over IPv6 is ready. Communication over IPv6 with snmp is available.
Snmp over IPX is ready. Communication over IPX with snmp is available.
Snmpd Start. The snmpd has started. This message is displayed
only when the power is turned on.
started. The direct printing service has started.
started. The IKE service has started.
Started. The bonjour (rendezvous) function has started.
stopped The supplicant has just stopped.
success key received The supplicant received the EAP-Success key.
success but invalid key The supplicant received a message reporting that
EAP authentication was successful, but the EAPOL
key was invalid.
supplicant started The supplicant has just started.
Message List
195
To Next Page
Loading...
