Ricoh LW426 - Windows 7; Windows Server 2008

• Available ports
vary according to your Windows operating system or the type of interface. For details,
see "Confirming the Connection Method", Printer Reference
.
Windows 7
This section describes the procedure under Windows 7.
1. On the Start menu, click [Control Panel].
2. Click [Hardware and Sound].
3. Click [Devices and Printers].
4. Click [Add a printer].
5. Follow the instructions in Add Printer Wizard.
If the
printer driver is on a CD-ROM, the location of the driver is "DRIVERS\PS\XP_VISTA\(language)
\DISK1". If the installer starts, click [Cancel] to quit.
6. Specify a port.
• Available ports
vary according to your Windows operating system or the type of interface. For details,
see "Confirming the Connection Method", Printer Reference
.
Windows Server 2008
This section describes the procedure under Windows Server 2008.
1. On the [Start] menu, click [Control Panel].
2. Click [Hardware and Sound].
3. Click [Printers].
4. Click [Add a printer].
5. Follow the instructions in Add Printer Wizard.
If the
printer driver is on a CD-ROM, the location of the driver is "DRIVERS\PS\XP_VISTA\(language)
\DISK1". If the installer starts, click [Cancel] to quit.
6. Specify a port.
• Available ports vary according to your Windows operating system or the type of interface. For details,
see "Confirming the Connection Method", Printer Reference .
Messages Displayed When Installing the Printer Driver
39
3