Message Causes Solutions
"Exceeded max. number of
pages of Document Server.
Cannot store."
The maximum page capacity
of the Document Server was
exceeded.
Delete some of the files stored in the
Document Server or reduce the number
of pages that you want to send.
"Exceeded max. number of
pages to print for
temporary / stored jobs."
While printing a Sample Print,
Locked Print, Hold Print or
Stored Print
file, the maximum
page capacity was
exceeded.
Delete unneeded files stored in the
machine.
Reduce the number of pages to print.
"Exceeded max. pages.
Collate is incomplete."
The number of pages
exceeds the maximum
number of
sheets that you can
use Collate with.
Reduce the number of pages to print.
"Failed to obtain file system." PDF direct printing could not
be performed
because the file
system could not be obtained.
Turn off the main power switch, and then
back on again. If the message appears
again, contact your service
representative.
"File system is full." PDF file does not print out
because the capacity of the
file system is full.
Delete all unnecessary files from the
hard disk, or decrease the file size sent
to the machine.
"HDD is full." The hard disk became full
while printing
a Sample Print,
Locked Print, Hold Print or
Stored Print file.
Delete unneeded files stored in the
machine.
Alternatively, reduce
the data size of the
Sample Print, Locked Print, Hold Print or
Stored Print file.
"HDD is full." When printing with the
PostScript 3
printer driver, the
hard disk capacity for fonts
and forms has been
exceeded.
Delete unneeded forms or fonts
registered in the machine.
3. Troubleshooting When Using the Printer Function
46
To Next Page
Loading...
