Problem Causes Solutions
Images are cut off, or excess
is printed.
You may be using paper
smaller than the size selected
in the application.
Use the same size paper as that selected
in the application. If you cannot load
paper of the correct size, use the
reduction function to reduce the image,
and then print. See the printer driver
Help.
Photo images are coarse. Some applications print at
lower resolution.
Use the application's settings to specify
a higher resolution.
Fine lines are fuzzy, of
inconsistent thickness, or do
not appear.
Super fine lines have been
specified in the application.
On the Printer driver's [Detailed Settings]
tab, click [Print Quality] in the "Menu:",
and then
change the "Dithering" setting.
If the problem continues after you
change the dithering settings, use the
settings of the application in which the
image was created to change the
thickness of the lines.
Solid lines are printed as
broken lines.
Dither patterns do not match. On the Printer driver's [Detailed Settings]
tab, click [Print Quality] in the "Menu:",
and then
change the "Dithering" setting.
When paper is not fed properly
Problem Causes Solutions
Paper is not fed from the
selected tray.
When you are using a
Windows operating system,
printer driver
settings override
those settings using the
display panel.
On the Printer driver's [Detailed Settings]
tab, click [Paper] in the "Menu:", select
the desired input tray in the "Paper
Source:" list.
Images are printed at a slant. The cut paper tray's side
fences might not be locked.
Check that the side fences are locked.
See "Changing the Paper Size", About
This Machine .
Images are printed at a slant. The paper is feeding in at a
slant.
Load the paper correctly. See "Loading
Paper", About This Machine
.
Misfeeds occur frequently. The number of sheets loaded
exceeds the capacity of the
machine.
Load paper only as high as the upper
limit markings on the side fences of the
cut paper tray or bypass tray.
3. Troubleshooting When Using the Printer Function
56
To Next Page
Loading...
