Problem Causes Solutions
Copy paper becomes
creased.
The paper is too thin. Use recommended paper. For details
about recommended paper, see
"Recommended Paper Sizes and
Types", About This Machine .
There is considerable delay
between the print start
instruction and actual
printing.
Processing time depends on
data volume. High volume
data, such
as graphics-heavy
documents, take longer to
process.
If the Data In indicator is blinking, data
has been received by the printer. Wait
for a moment.
There is considerable delay
between the print start
instruction and actual
printing.
The paper type setting was
changed.
If the paper type setting has been
changed, there
might be a delay before
printing begins. Wait for a moment.
Other printing problems
Problem Causes Solutions
It takes a long time to
complete a print job.
The machine might be in "Off
mode".
The machine requires time to warm up if
it has been in "Off mode". In [System
Settings], under [Timer Settings], select
[Auto Off Timer], and then specify "Off
mode".
It takes a long time to
complete a print job.
Photographs and other data
intensive pages take a long
time for the machine to
process, so
simply wait when
printing such data.
If the Data In indicator is blinking, data
has been received by the printer. Wait
for a moment.
Changing the
following settings with the
printer driver may help speed up
printing:
1. On the printer driver's [Detailed
Settings] tab, click [Print Quality] in
the "Menu:"
2. Select a lower resolution in the
"Resolutions:" list.
3. Troubleshooting When Using the Printer Function
58
To Next Page
Loading...
