Ricoh LW426 - Page 69

Message Causes Solutions
"LDAP server authentication
has failed. Check the
settings."
The user name and password
differ from those set for LDAP
Authentication.
In [System Settings], under
[Administrator Tools], check the settings
of LDAP server. For details, see
"Programming the LDAP server",
Network and System Settings Reference
.
"Memory is full. Cannot scan.
The scanned data will be
deleted."
Because of insufficient hard
disk space, the first page
could not be scanned.
Try one of the following measures:
• Wait for
a while, and then retry the
scan operation.
• Reduce the scan area or scanning
resolution. See "Scan Settings" of
Various Scan Settings, Scanner
Reference
.
• Delete unneeded stored files. See
"Deleting a Stored File", Scanner
Reference .
"Memory is full. Do you want
to store scanned file?"
Because there is not enough
free hard disk space in the
machine for storing in the
Document Server, only some
of the pages could be
scanned.
Specify whether to use the data or not.
"Memory is full. Press [Write]
to write the current scanned
data to the memory storage
device, or press [Cancel] to
delete."
The scan could not be
completed because there
was insufficient hard disk
memory at the time of saving
to the memory device.
Select whether or not to save the
scanned document to the memory
device.
"Memory is full. Scanning has
been cancelled. Press [Send]
to send the scanned data, or
press [Cancel] to delete."
Because there is not enough
free hard disk space in the
machine for delivering or
sending by e-mail while
storing in the Document
Server, only some of the
pages could be scanned.
Specify whether to use the data or not.
Messages Displayed When Using the Scanner Function
67
4