Ricoh M 2701 - Easy Setup Using the WPS Button

8
13. Press the [Escape] key.
14. Press the [
] or [ ] key to select [WiFi Setup Wizard], and
then press the [OK] key.
2/3
Print List/Report
WiFi Setup Wizard
Network Settings
DZV157
15. If you are requested to enter a password, enter the
password using the number keys, and then press the [OK]
key.
Enter Password
Setup Wizard are Locked
DZV176
A password for accessing the [WiFi Setup Wizard] menu can be
specified in [Admin. Tools Lock] under [Admin. Tools] menu.
16. Press the [
] or [ ] key to select SSID of the router (access
point) from the searched SSID list, and then press the [OK]
key.
17. Enter the encryption key using the number keys, and then
press the [OK] key.
DZV158
Password
Key :
(8-63chars/64hex)
WPA2-PSK
• As the passphrase, you can enter either 8 to 63 ASCII characters
(0x20-0x7e) or 64 hexadecimal digits (0-9, A-F, a-f).
• For details about checking the encryption key, see “Checking the
SSID and Encryption key”.
18. Press the [OK] key.
DZV159
Are you sure to connect?
(OK/Back)
19. Check the result.
Connection has succeeded:
DSG355
Connect succeed!
Connection has failed:
DSG356
Connect failed!
• Checkthecongurationfortherouter(accesspoint),andthen
try the connection again.
Configuring the Wireless (Wi-Fi) settings is complete.
To use the printer driver, install the printer driver according
to the procedure on page 11 "Easy Setup Using the
CD-ROM" and select "Automatically configure the printer
network" on Step 6.
Easy Setup Using the WPS Button
● Make sure the Ethernet cable is not connected to the
machine.
● In Steps 16 to 18, congure each setting within two
minutes.
The following item is necessary to set up a Wireless
(Wi-Fi) connection.
● Router (access point)
1. Check that the router (access point) is working correctly.
2. Make sure the wireless LAN option is attached to the
machine.
For details, see page 6 "Attaching the wireless LAN option".
3. Press the [User Tools/Counter] key.
DZV451
4. Press the [ ] or [ ] key to select [Network Settings], and
then press the [OK] key.
2/3
Print List/Report
Network Settings
Copier Features
DZV150
5. If you are requested to enter a password, enter the
password using the number keys, and then press the [OK]
key.
Enter Password
Network Set. are Locked
DZV151
A password for accessing the [Network Settings] menu can be
specified in [Admin. Tools Lock] under [Admin. Tools] menu.
6. Press the [
] or [ ] key to select [WiFi], and then press the
[OK] key.
1/2
Ethernet
WiFi
IPv4 Configuration
Network Settings
DZV152
7. Check [WiFi Enable] is selected, and then press the [OK]
key.
WiFi Enable
DZV153
WiFi
8. Press the [ ] or [ ] key to select [Enable], and then press
the [OK] key.
Disable
Enable
WiFi Enable
DZV154
9. Turn off the machine and then turn on.
10. Repeat Steps 3 to 5.