5. If you are requested to enter a password, enter the password using the number keys,
and then press [OK].
You can display the software keyboard by double tapping the entry area on the display.
A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock]
under [Administrator Tools] menu.
6. Press [Wi-Fi Enable].
7. Press [Enable].
8. Turn off the machine, and then turn it back on.
9. Press the wireless LAN icon.
10. If you are requested to enter a password, enter the password using the number keys,
and then press the [OK].
You can display the software keyboard by double tapping the entry area on the display.
A password for accessing the [Wi-Fi Configuration] menu can be specified in [Admin. Tools Lock]
under [Administrator Tools] menu.
11. Press [Setup Wizard].
12. Press the SSID of the router (access point) from the searched SSID list.
13. Enter the encryption key using the number keys, and then press the [Connect].
As the passphrase, you can enter either 8 to 63 ASCII characters (0x20-0x7e) or 64 hexadecimal
digits (0-9, A-F, a-f).
14. Check the result.
• Connection has succeeded:
Configuring the Wi-Fi settings is complete.
• Connection has failed:
Check the configuration for the router (access point), and then try the connection again.
Using the WPS Button
A router (access point) is needed to set up a connection.
Make sure the Ethernet cable is not connected to the machine.
1. Check that the router (access point) is working correctly.
When selecting [Detailed Setup], proceed to step 10.
11. Configuring Network Settings
394
To Next Page
Loading...
