Ricoh M052 - Page 239

System SP4-xxx
SM 5-17 M052/M053/M054
System
Maintenance
Reference
4013
[Scanner Free Run]
Performs the scanner free run with the exposure lamp on or off in the following
mode.
Full color mode / Full Size / A4 or LT
001 Lamp: OFF
*ENG OFF or ON
002 Lamp: ON
4014
[Scan]
Execute the scanner free fun with each mode.
001 HP Detection Enable - Scanner free run with HP sensor check.
002 HP Detection Disable - Scanner free run without HP sensor check.
4020 [Dust Check]
001 Dust Detect: On/Off *ENG
Turns the DF scan glass dust check on/
off.
[0 or 1 / 0 / 1 /step]
0: OFF, 1: ON
002 Dust Detect: Lvl *ENG
Selects the detect level.
[0 to 8 / 4 / 1 /step]
0: lowest detection level
8: highest detection level
003 Dust Correct: Lvl *ENG
Selects the level of the sub scan line
correction when using the ARDF.
[0 to 4 / 0 / 1 /step]
0: Off
1: Weakest
2: Weak
3: Strong
4: Strongest