Ricoh M065 - Page 323

SC Tables
SM Appendix 3-13 M065/M066
Appendix:
Service Call
Conditions
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
364 D TD sensor (Vt low) error 2: K
365 D TD sensor (Vt low) error 2: M
366 D TD sensor (Vt low) error 2: C
367 D TD sensor (Vt low) error 2: Y
- -
The Vt value of the black, magenta, cyan, or yellow TD sensor is below
the specified value with SP3020-004 (default: 0.5V) ten counts.
 TD sensor harness disconnected, loose, defective
 A drawer connector disconnected, loose, defective
 TD sensor defective
1. Check the black, magenta, cyan, or yellow TD sensor connector
and harness between the TD sensor and development unit for
damage.
2. Check the drawer connector of the PCDU.
3. Replace the PCDU.