Ricoh M065 - Page 364

SC Tables
M065/M066 3-54 SM Appendix
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
875
CTL
D
Delete All error 2: Data area
An error is detected while all of the HDD or NVRAM are formatted
logically by the DataOverwriteSecurity Unit.
 The logical format for the HDD fails.
Turn the main switch off/on and try the operation again
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
876
CTL
D
Log Data Error
An error was detected in the handling of the log data at power on or
during machine operation. This can be caused by switching the
machine off while it is operating.
-001
Log Data Error 1
 Damaged log data file in the HDD
Initialize the HDD.
-002
Log Data Error 2
 An encryption module not installed
1. Disable the log encryption setting with SP9730-004 ("0" is off.)
2. Install the DESS module.
-003
Log Data Error 3
 Invalid log encryption key due to defective NVRAM data
1. Initialize the HDD.
2. Disable the log encryption setting with SP9730-004 ("0" is off.)
-004
Log Data Error 4
 Unusual log encryption function due to defective NVRAM data
Initialize the HDD.