Ricoh M065 - Page 432

System Service Mode
M065/M066 8-22 SM Appendix
1120 [Multi-Print Mode]
001
Feed Condition *ENG
[0 or 2 / 0 / 1]
Selects the paper feed timing.
0: Productivity priority, 1: Fusing quality priory
1121 [Maximum Duty Switch]
001
Control Method Switch *ENG
[0 or 1 / 1 / 1]
Selects the power control method for the fusing unit.
0: Fixed control, 1: Power control
1159 [Fusing Jam Detection]
001
SC Display *ENG
[0 or 1 / 0 / 1]
Enables or disables the fusing consecutive jam (three times) SC detection.
0: No detection, 1: Detection
1201 [CPM Down Setting] DFU
001 Low: Down Temp. *ENG
[-50 to 0 / -10/ 1 deg/step]
002 Low: Up Temp. *ENG
[-50 to 0 / -7/ 1 deg/step]
003 Low: 1st CPM *ENG
[10 to 100 / 80 / 5 %]
004 Low: 2nd CPM *ENG
[10 to 100 / 65 / 5 %]
005 Low: 3rd CPM *ENG
[10 to 100 / 50 / 5 %]
006 Unit Low Judge Temp. *ENG
[0 to 100 / 65/ 1 deg/step]
007 High: 1st CPM *ENG
[10 to 100 / 75 / 5 %]
008 High: 2nd CPM *ENG
[10 to 100 / 50 / 5 %]
009 High: 3rd CPM *ENG
[10 to 100 / 25 / 5 %]
010 Hi: 1-CPM DwnTemp. *ENG
[160 to 240 / 210/ 1 deg/step]