System Service Mode
M065/M066 8-168 SM Appendix
2906 [Drum Phase Angle] DFU
001 Y *ENG
[0 to 359 / 0 / 1 deg/step]
002 M *ENG
003 C *ENG
004 K *ENG
005 Color *ENG
[Drum Amplitude Setting] DFU
006 Y *ENG
[0 to 100 / 0 / 0.1
m/step]
007 M *ENG
008 C *ENG
009 K *ENG
010 Color *ENG
[Drum Stop Position] DFU
011 K *ENG
[0 to 359 / 0 / 1 deg/step]
012 Color *ENG
2907
[FC: ACS] DFU
Adjusts the threshold for moving away the image transfer belt from the color
PCUs. This SP moves the image transfer belt away from the color PCUs when
the number of B/W image printouts reaches the number of sheets specified
with this SP after consecutive full color image printouts in the full color mode.
If this SP is set to "0", the image transfer belt does not move away.
001 Bk Image Count *ENG
[0 to 10 / 0 / 1 sheet/step]
To Next Page
Loading...
