Ricoh M065 - Page 586

System Service Mode
M065/M066 8-176 SM Appendix
3021
[TD Sensor Initial Set] Developer Initialization Setting
Specifies the developer agitation time for each color at the developer
initialization.
001 Agitation Time: Bk *ENG
[0 to 200 / 65 / 1 sec/step]
002 Agitation Time: C *ENG
003 Agitation Time: M *ENG
004 Agitation Time: Y *ENG
005-
008
Sets the execution flag of the developer initialization for each color.
005 Execution Flag: Bk *ENG
[0 or 1 / 0 / 1/step]
0: Flag OFF, 1: Flag ON
This flag is cleared after executing TD
sensor initialization.
006 Execution Flag: C *ENG
007 Execution Flag: M *ENG
008 Execution Flag: Y *ENG
009 Initial Setting Prohibition *ENG
Enables or disables developer
initialization. DFU
[0 or 1 / 0 / 1/step]
0: Enable, 1: Disable
3022
[Toner Replenishment Mode]
Sets the toner supply flag of each color.
005 Execution Flag: Bk *ENG
[0 or 1 / 0 / 1/step]
0: Flag OFF, 1: Flag ON
This flag is cleared after executing TD
sensor initialization.
006 Execution Flag: C *ENG
007 Execution Flag: M *ENG
008 Execution Flag: Y *ENG