Ricoh M065 - Page 679

System Service Mode
SM Appendix 8-269 M065/M066
Appendix:
SP Mode
Tables
022 SMTP Auth. From Field Replacement
[0 to 1 / 0 / – ]
Determines whether the FROM item of the mail header is switched to the
validated account after the SMTP server is validated.
0: No. "From" item not switched.
1: Yes. "From" item switched.
025 SMTP Auth. Direct Setting
[0 or 1 / 0 / – ]
Selects the authentication method for SMPT.
Bit switch:
 Bit 0: LOGIN
 Bit 1: PLAIN
 Bit 2: CRAM MD5
 Bit 3: DIGEST MD5
 Bit 4 to 7: Not used
 This SP is activated only when SMTP authorization is enabled by UP
mode.
026
S/MIME: MIME Header
Setting
-
Selects the MIME header type of an
E-mail sent by S/MIME.
[0 to 2 / 0 / 1]
0: Microsoft Outlook Express standard
1: Internet Draft standard
2: RFC standard
5866 [E-mail Report] Not Used
001 Report Validity *CTL
Enables or disables the e-mail alert.
[0 or 1 / 0 / – ]
0: Enable, 1: Disable
005 Add Date Field *CTL
Adds or does not add the date field to
the header of the alert mail.
[0 or 1 / 0 / – ]
0: Not added, 1: Added