System Service Mode
M065/M066 8-270 SM Appendix
5869 [RAM Disk Setting]
001
Mail Function *CTL#
[0 to 1 / 0 / 1/step]
0: ON, 1: OFF
Enables or disables the e-mail transfer function. This SP sets the RAM disk
size for the e-mail transfer function.
5870 [Common Key Info Writing]
001 Writing *CTL
Rewrites the common certification used
for the @Remote.
003
Initialize *CTL -
Initializes the set certification.
When the GW controller board is replaced with a new one for repair, you must
execute the "Initiralize (-003)" and "Writing (-001)" just after the new board
replacement.
NOTE: Turn off and on the main power switch after the "Initiralize (-003)" and
"Writing (-001)" have been done.
5873 [SD Card Appli Move]
001 Move Exec
This SP copies the application programs from the original
SD card in SD card slot 2 to an SD card in SD card slot 1.
002 Undo Exec
This SP copies back the application programs from an SD
card in SD Card Slot 2 to the original SD card in SD card slot
1. Use this menu when you have mistakenly copied some
programs by using "Move Exec" (SP5873-1).
To Next Page
Loading...
