Ricoh M126 - Page 223

M126/M127/M128 6-18 SM
User primary message Explanation
56 Standard USB
PortDisabled
This message may appear when data is sent to the machine
across a USB port, but the port is disabled.
 Once the error is displayed the first time, reporting
of further errors is suppressed until the machine is
reset or menus are entered.
The following actions can be taken:
 Press "Select" (
) to clear the message.
Any data received on the USB port is discarded.
 Press "Menus" (
) to access the Busy/Waiting Menu.
The following functions may be available:
-Turn the machine power off and then back on to reset
the machine.
-Reset Active Bin
-Check Supply Levels
Make sure the USB Buffer menu item is not set to Disabled.
(Press "Menus"
to access the Administrative Menus,
select "Network/Ports", "USB Menu", and "USB Buffer".)
58 Too many Flash
Options Installed
1. Turn off and unplug the machine.
2. Remove the excess flash memory.
3. Plug in the machine, and turn it on.
58 Too Many
TraysAttached
1. Turn off and unplug the machine.
2. Remove the additional trays.
3. Plug in the machine, and turn it on.
59 Incompatible Tray <x>
An incompatible tray is installed. For Tray x, x= 2, 3, 4, or 5.
Remove the incompatible tray and press
to clear the
message.
If the user installed the incompatible device to satisfy a
Check Device Connections/reattach message, the user
should reinstall an associated compatible option or hot
unplug the option.
1. Turn off and unplug the machine.
2. Remove the incompatible trays.
3. Plug in the machine, and turn it on.